| |
Document ID: 041021083758
| Document Title: |
How to Connect the TEHMA to a Cordless Analog Phone |
Pertains to: TEHMA; OHP 5500; MOH 500e
Category(ies): Equipment/Hardware;
How to
Last Updated: 12/17/2004
Situation:
You want to connect a TEHMA to a corded analog phone in conjunction with an OHP 5500 Message On Hold player or MOH 500e Message On Hold Adapter.
Article:
If you wish to connect the TEHMA to a corded phone, please see the following Knowledgebase article:
How to Connect the TEHMA to a Corded Analog Phone
Please note connecting a TEHMA to a cordless phone requires use of a headset. If your cordless phone is not headset-compatible, or you do not wish to use a headset with your cordless phone, please see the following Knowledgebase article:
How to Place a Call On Hold Without Using a TEHMA
Follow these 5 simple installation steps, and you'll have the TEHMA connected to an cordless analog phone system in no time.
Step 1:
Find the headset jack on the cordless phone.
|
 |
Step 2:
Plug the male end of the RJ-22 to Cordless Adapter (Male) into the headset jack on the phone.
|
Step 3:
Plug the other end of the adapter into the "B" side of the TEHMA.
|
|
Step 4:
Plug the RJ-22 end of the RJ-22 to Cordless Adapter (Female) into the "A" side of the TEHMA.
|
Step 5:
Plug your headset into the female end of the adapter.
|
|
|
Overview:
|
 |
|
|
|
Home | Welcome Center | Message On Hold | Voice Recordings | Store | Resources | Customer Support | Knowledgebase | Contact Us | Site Guide | Advanced Search | Privacy / Security Policy | Legal Notice